Complete Granulation

Line 

Unused

Fielder PMA 300, with Fluid Bed Dryer Aeromatik Flexstream 1500 in 10 bar saftey version, with Wet Sieve Quadro Comil and Final Sieve and Vacuum transfer system 
WIP System
PLC Control 

, with High Shear Mixer, with Wet Sieve, with Fluid Bed Dryer, With Container System, Container Blender, Lifing Device, Final Sieve, Suspension Preparation System

Complete Glatt Combo Granulation Line

with Granulation, Drying and Pellet Coating

unused

NEW NEW NEW

1. HSM Top Drive Granulator (TDG 1000)  Capacity  approx.. 250 – 600kg / batch

2. Wet Discharge Mill (GSF220)

3.Fluid Bed Processor (WS Combo 750)     Capacity  250 – 450 kg

3.      Granulating/Drying Container

4.      32-inch Wurster HS Insert   Capacity  200- 300 kg  for Pellet Coating and Particel  Coating

5. Dry Granulation Mill (GS180)

1. HSM Top Drive

Built for aqueous processing with powders MIE>10 mJ 

2.Through the wall construction.  All utility connections in technical area.

3. Sidewall and lid are double walled (jacketed)

4. Hot/cold water mixing valve with temperature transmitter for jacket temperature control

5.SS cartridge filter (10 µm) with pulse jet cleaning and suitable for WIP

6.Gravity feed charge port on lid

7. Vacuum Conveying system for charging provided

8. Three bladed top drive agitator with VFD

9. Speed and torque of agitator displayed on HMI

10.  Top drive chopper with knife edged, cross-screw blades.  Height of chopper is adjustable.

11.  Shafts have dry running seals with air purge

12.  Pneumatically actuated discharge flap

13.  DataPlus 5000 control system (AB Control Logix, PC based HMI, WonderWare InTouch) with wall mount NEMA 4x HMI with 19” TFT monitor.

14.  PE Panel (120” W x 84” H x 25” D)

15.  Non-XP color camera system for product inspection

16.  Peristaltic pump with mass flowmeter for liquid addition (non-atomized spray)

17.  WIP nozzles

2. Wet Discharge Mill (GSF220)

1.      Built for aqueous processing with powders MIE>10 mJ

2.      Docks with discharge of TDG

3.      Hinge mounted to TDG housing

4.      Controlled from TDG HMI

5.      WIP nozzles

3.      Granulating/Drying Container

a. 1046L product container (dimensioned same as Wurster).  Product volume can run as low as 20% of bowl capacity.

b.      12-bar construction

c.      Side discharge port

d.      Top spray granulation 3-head SL nozzle  and 1.8 mm nozzle ports

e.      100 micron Conidur bottom plate. Special bottom plate

f.       Product bowl trolley

4.      32-inch Wurster HS Insert   Capacity  200- 300 kg  for Pellet Coating and Particel  Coating

a.      One type B down bed plate and three type G up bed plates

b.      100 micron product retention screen

c.      Wurster with 3 HS type LD nozzles with 1.5mm nozzle ports

d.      Center product discharge system for vacuum discharge

e.      Wurster bowl trolley

5.      Ancillary Equipment

a.      Direct drive exhaust fan with frequency regulation

b.      Inlet and exhaust explosion barrier safety valves

c.      Inlet, product, exhaust air temperature sensors

d.      Process air volume transmitter

e.      Total air volume  transmitter

f.       Active bypass

g.      Peristaltic pump with three heads on single drive and mass flow meter

h.      Torit DFO 3-12 dust collector with BIBO

i.        Exhaust air HEPA filter with BIBO

6.      Fluid Bed Discharge Pneumatic Conveying System

a.      Injector vacuum

b.      Height adjustable hydraulic driven post hoist

c.      Integration with GS 180 mill

7.      Control System

a.      DataPlus 5000AF non-XP execution

b.      AB ControlLogix PLC

c.      PC based HMI

d.      WonderWare InTouch SCADA

e.      SQL Server 2005 Relational Database

f.       PE Panel (96” W x 84” H x 20” D)

g.      Spray rate loss-in-weight control

5. Dry Granulation Mill (GS180)

1. Built      for aqueous processing with powders MIE>10 mJ
2. Connect      to Fluid Bed discharge with hose
3. Controlled      from WS Combo 750 HMI
4. WIP      nozzles
5. Hinged      designed to integrate with Pneumatic Conveying System support

Once Through WIP Skid for Integrated Trai

1.      Stand-alone unit for cleaning media up to 90C

2.      Includes mixing unit, dosing system, booster pump, distribution system

3.      Local control system interfaces with TDG and WS Combo control systems

Aeromatik  Fluid Bed Coater for Pelletswith complete inlet air preparation part, fan, police filter, Spraying system 
Bottom Spray with 5 Nozzle 

PC 5/S 6
with 500ltr. Volumen

with PLC Control, with inlet and outlet air handling System
Wurster System 

150-250 kg /batch

Glatt Fluid Bed Dryer WST / 120/200

WST 120/ 200

 with new PLC Control, with new inlet and outlet air handling system 

Fluid Bed  Dyer Granulator  WST/ WSG 60

WSG/ WST 60

with new inlet and new outlet air handling part with New PLC control Siemens S 7 with Touch screen 

Glatt Coater GC 1500 X Verision

GC 1500

250- 500kg/batch

Complete with inlet air handling part, outlet air handling partSiemens S7 PLC Control SystemSystem with washing nozzles and WIP Rack and Automatic ControlComplete Spraying system with 5 Nozzles , Spray pump with 5 heads and 5 KrohneVolume measurements for each tube and total spray volume measurement and 2 spraying tanks with agitator and double walled 4 Fischer Baffles for work with reduced Batchsize  Loading and Discharging  trough the front door with loading and discharge device. 

Glatt Coater GC x 1500

GC x 1500

Complete with new inlet air handling part, outlet air handling partSiemens S5 PLC Control System

IMA Tablet Coater

Unused

IMA Perfima  200 Tablet Coater

 Complete with  inlet air handling part, outlet air handling part Control System

IMA Tablet Coater

Unused

Ima

Perfima 500Tablet Coater

Complete with  inlet air handling part, outlet air handling part Control System

Bohle Coater

BTC 400 / Unused

-         1  Complete – Bohle Coater Type BTC 400 / Unused  
Manufactured by Bohle
Model BTC  
150 -450 kg / batch

-         With Complete AHU Inlet Air Preparation part  

With Outlet Air Handling Part

Spraying System with 6 Nozzles and spraying pump

PLC Control System

-         WiP Station

Line not used. Built 2012

All documents available

  With Complete AHU Inlet Air Preparation part   

With Outlet Air Handling Part

Spraying System with 6 Nozzles and spraying pump

PLC Control System

-         WiP Station

Line not used. Built 2012

All documents available

Kilian Tablettenpresse

T 100

with 24 Stations, Toooling Bmax. 16 mm Tabl. diameter,  

min.       48.000 Tabl./hmax.     130.800 Tabl./h

Fette Tablettenpresse

Fette 2000

with 36 Stations, Toooling B max. 16mm Tabl. diameter, with  Controll ,Tablet Deduster Pharmatechnology  und Krämer Filter System 

min.        48.000 Tabl./hmax.       230.800 Tabl./h

Fette Tablettenpresse

Fette 2100

with 43 Stations, Toooling BB max. 13mm Tabl. diameter, with  Datacontroll 2,Tablet Deduster Pharmatechnology  und Krämer Filter System 

min.        48.000 Tabl./hmax.       230.800 Tabl./h

Bohle GMA 1200

GMA 1200

High Shear Mixer Granulator with PLC Control and CIP,With Wet Sieve 

600-900/ Kg /batch

Container Blender Bohle PM 1000

1000ltr.

with Adapter for Pharma Container IPC Bohle MC 1200/800 and Müller drums

 200-500 kg

Frewitt Conwitt 150 

150

Frewitt Conwitt  like Quadro -Comill 

500-1500kg/h

Liquid Solution Preparation System with 2x

2x 240ltr.1x 100ltr.

240 ltr. vessels with agitior and 1x 100 ltr.  

100– 200ltr.

Pilot and Small Production Glatt Coater GC 750/ 500 with chanceable drums

GC 750/500

Complete with inlet air and outlet air preparation part and Spraying system 

Max 60 kgTablet / min 15 kg

Type Fielder High Shear Mixer New

 PMA 600

PLC Control 

150-250 kg/batch

Type Diosna High Shear Mixer P 600 with   
 NEW PLC Control S 7

P 600

150-250 kg/batch

Accella Coater 500

with   new   PLC Control Siemens S 7   Unused             New   Batch Size 30-50 kg

300-500 kg/batch

Blisterline
Uhlmann UPS 4
 With C 300

UPS 4
with Alu-Alu

Complete Linewith New PLC Control
 

400 blister/min

Stretchbundler Uhlmann E 3025

Year 2004

With PLC control

Fette Tablet Press P1200 

Format B

complete            refurbished, with new PLC Control          Software Windows XP

Bausch + Strobel Complete Filling Line   

Working             principle: Piston pump, 20mm and 32mm            closures  ,Clean room class C,LAFManufacturer: Bausch + Strobel                  Filler: Piston Pump with 8 diving heads: Type UDF 4020                  Push on Stopper Touch screen: Type KS1025: year 1995                  Crimp capper with vibratory bowl: Type KS1020                 Capacity: 50ml Injections 3300 bottles per hour  100ml Injections 3300 bottles per hour                  100ml Infusions 3000 bottles per hour

Müller drum Lifter 
100ltr and 200ltr 

Lifting and Discharge device for WSG 120
container

WSG 120 Container

Stainless steel colum with stainless steel  cone for lifting and discharging WSG 120 container

High Shear Mixer Collette Gral 75

Gral 75

High Shear MIxer granulator with double wall container

20- 50 kg/batch

Quadro Comill U 20

U 20

Wet mill

500- 1000kg/h

Capsule Filler Bosch GKF 1700
High Pro Tec Containment

GKF 1700

for Pellets, Powder and Tablets
New not Used

Glatt FB Type GPCG 3 /1

with Wurster Inserts 7" and 7" and GPCG 3 and GPCG 1 Insert

Haro Höflinger
Capsule Filler

MS-C                     Modul
Year 2011

  for Liquid in  
  Hardgelantine Capsules

Waldner Vacuum Dryer V= 1300ltr.

Year 2011